One Firmware, Many Logos: How the Dahua Firmware Finder Works

Say you own an Amcrest IP4M-1041, a little pan-and-tilt camera, and you want to know if there’s newer firmware for it. You go to Amcrest’s site and find a file. Then you go to Dahua’s site, and EmpireTech’s, and a Polish distributor’s FTP server, and you find more files with completely different names. Which ones will actually install on your camera?

That question is why I built the Dahua Firmware Finder. It tracks about 9,500 firmware files from 51 sources, works out which devices each one is built for, and keeps a permanent copy of every file on the Internet Archive. This post covers how it does that, and the thing I learned along the way: a huge number of “different” cameras are the same hardware with a different sticker on it.

Continue reading One Firmware, Many Logos: How the Dahua Firmware Finder Works

Five Taps and a Zip File: Running My Own Code on a Denon DJ Player

A Denon Prime GO is a $1,000 standalone DJ controller. No laptop, no phone; you put music on a USB stick, plug it in, and play. It has a touchscreen, two decks, a battery, and absolutely no reason to let you run your own software on it.

It does anyway. You tap the version number five times, put a zip file on a flash drive, and it runs whatever you gave it.

I’ve been documenting inMusic’s firmware for a couple of years now. Denon DJ, Numark, Akai, HeadRush, Rane all share a codebase, so work on one device tends to apply to a dozen. Everything in this post lives in my documentation site. But the way into the device is my favorite thing I’ve found in it, partly because of how it works and partly because of a bug I found in inMusic’s own version of it.

Let me walk you through it.

Continue reading Five Taps and a Zip File: Running My Own Code on a Denon DJ Player